diff --git a/.gitattributesdb b/.gitattributesdb index 5664795..26cf4c8 100644 --- a/.gitattributesdb +++ b/.gitattributesdb @@ -46,41 +46,13 @@ ZXRjL21zbXRwcmMuZ3Bn 1761052674 1758049424 root:root 0644 - - ZXRjL25ldHdvcmsvLmdpdGlnbm9yZQ== 1757596572 1757596572 root:root 0644 - - ZXRjL25ldHdvcmsvaW50ZXJmYWNlcw== 1758915694 1757596330 root:root 0644 - - ZXRjL29wZW5sZGFwL2xkYXAuY29uZg== 1758374529 1730112559 root:root 0644 - - -ZXRjL3Bhc3N3ZA== 1757873724 1757869538 root:root 0644 - - +ZXRjL3Bhc3N3ZA== 1761056398 1761056398 root:root 0644 - - ZXRjL3BlcmlvZGljL2RhaWx5LzAtcm90YXRlLWxvZ3Mtc3ltbGlua3M= 1758222266 1758222266 root:root 0777 - - ZXRjL3BlcmlvZGljL2RhaWx5LzEwLWRlaHlkcmF0ZWQ= 1757708520 1757708520 root:root 0777 - - ZXRjL3BlcmlvZGljL2RhaWx5LzUtdXBkYXRlLXBhY2thZ2VzLWxpc3Q= 1757708520 1757708520 root:root 0777 - - ZXRjL3BlcmlvZGljL2RhaWx5Lzctd2Fybi1naXQtc3RhdHVz 1757708520 1757708520 root:root 0777 - - ZXRjL3BlcmlvZGljL3dlZWtseS85LWNsZWFuLXBocA== 1758294154 1758289390 root:root 0755 - - -ZXRjL3BocDg0L2NvbmYuZC8uZ2l0aWdub3Jl - - -ZXRjL3BocDg0L2NvbmYuZC85OV9iY21hdGguaW5p - - -ZXRjL3BocDg0L2NvbmYuZC85OV9jdXJsLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9kYmEuaW5p - - -ZXRjL3BocDg0L2NvbmYuZC85OV9leGlmLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9nZC5pbmk= - - -ZXRjL3BocDg0L2NvbmYuZC85OV9pY29udi5pbmk= - - -ZXRjL3BocDg0L2NvbmYuZC85OV9pbWFwLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9pbnRsLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9sZGFwLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9tYnN0cmluZw== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9teXNxbGkuaW5p - - -ZXRjL3BocDg0L2NvbmYuZC85OV9teXNxbG5kLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9vZGJjLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9vcGNhY2hlLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9vcGVuc3NsLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9wZG8uaW5p - - -ZXRjL3BocDg0L2NvbmYuZC85OV9wZG9fbXlzcWwuaW5p - - -ZXRjL3BocDg0L2NvbmYuZC85OV9wZ3NxbC5pbmk= - - -ZXRjL3BocDg0L2NvbmYuZC85OV9waGFyLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9zZXNzaW9uLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9zb2FwLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9zcWxpdGUzLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV9zeXN2c2htLmluaQ== - - -ZXRjL3BocDg0L2NvbmYuZC85OV90aWR5LmluaQ== - - -ZXRjL3BocDg0L3BocC1mcG0uY29uZg== - - -ZXRjL3BocDg0L3BocC1mcG0uZC93d3cuY29uZg== - - -ZXRjL3BocDg0L3BocC5pbmk= - - -ZXRjL3BrZ2xpc3Q= 1761004800 1757609913 root:root 0644 - - +ZXRjL3BrZ2xpc3Q= 1761696000 1757609913 root:root 0644 - - ZXRjL3BsYS9jb25maWcucGhwLmdwZw== 1761052640 1758539944 root:root 0644 - - ZXRjL3B1c2hvdmVyLWNsaWVudC9kZWZhdWx0 1758224985 1758224590 root:root 0600 - - ZXRjL3Jlc29sdi5jb25m 1757611605 1757611605 root:root 0644 - - @@ -141,8 +113,8 @@ dmFyL2xpYi9waHAvc2Vzc2lvbnMvLmdpdGtlZXBkaXI= - - dmFyL2xpYi9waHAvdXBsb2Fkcy8uZ2l0a2VlcGRpcg== - - ZXRjL2RvYXMuY29uZg== 1728635393 1728635393 root:root 0640 - - ZXRjL2RvYXMuZA== 1757595612 1757595612 root:root 0750 - - -ZXRjL3NoYWRvdw== 1757873748 1757869538 root:shadow 0640 - - -ZXRjL3NoYWRvdy0= 1757761290 1757702629 root:shadow 0640 - - +ZXRjL3NoYWRvdw== 1761056398 1761056398 root:shadow 0640 - - +ZXRjL3NoYWRvdy0= 1761056356 1761056356 root:shadow 0640 - - ZXRjL3N1ZG9lcnM= 1753553353 1753553353 root:root 0440 - - ZXRjL3N1ZG9lcnMuZC9kZWZhdWx0cw== 1757599359 1757599359 root:root 0640 - - ZXRjL3N1ZG9lcnMuZC9yb290LWFjY2Vzcw== 1757600157 1757600157 root:root 0640 - - diff --git a/etc/php84/conf.d/.gitignore b/etc/php84/conf.d/.gitignore deleted file mode 100644 index af94d76..0000000 --- a/etc/php84/conf.d/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/00_* diff --git a/etc/php84/conf.d/99_bcmath.ini b/etc/php84/conf.d/99_bcmath.ini deleted file mode 100644 index 0e9b8b5..0000000 --- a/etc/php84/conf.d/99_bcmath.ini +++ /dev/null @@ -1,4 +0,0 @@ -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 diff --git a/etc/php84/conf.d/99_curl.ini b/etc/php84/conf.d/99_curl.ini deleted file mode 100644 index 16b978e..0000000 --- a/etc/php84/conf.d/99_curl.ini +++ /dev/null @@ -1,4 +0,0 @@ -[curl] -; A default value for the CURLOPT_CAINFO option. This is required to be an -; absolute path. -;curl.cainfo = diff --git a/etc/php84/conf.d/99_dba.ini b/etc/php84/conf.d/99_dba.ini deleted file mode 100644 index e5bc8bf..0000000 --- a/etc/php84/conf.d/99_dba.ini +++ /dev/null @@ -1,2 +0,0 @@ -[dba] -;dba.default_handler= diff --git a/etc/php84/conf.d/99_exif.ini b/etc/php84/conf.d/99_exif.ini deleted file mode 100644 index b31c0ce..0000000 --- a/etc/php84/conf.d/99_exif.ini +++ /dev/null @@ -1,23 +0,0 @@ -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS diff --git a/etc/php84/conf.d/99_gd.ini b/etc/php84/conf.d/99_gd.ini deleted file mode 100644 index 9da3c78..0000000 --- a/etc/php84/conf.d/99_gd.ini +++ /dev/null @@ -1,6 +0,0 @@ -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 1 diff --git a/etc/php84/conf.d/99_iconv.ini b/etc/php84/conf.d/99_iconv.ini deleted file mode 100644 index 14bcfd5..0000000 --- a/etc/php84/conf.d/99_iconv.ini +++ /dev/null @@ -1,17 +0,0 @@ -[iconv] -; Use of this INI entry is deprecated, use global input_encoding instead. -; If empty, default_charset or input_encoding or iconv.input_encoding is used. -; The precedence is: default_charset < input_encoding < iconv.input_encoding -;iconv.input_encoding = - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;iconv.internal_encoding = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; If empty, default_charset or output_encoding or iconv.output_encoding is used. -; The precedence is: default_charset < output_encoding < iconv.output_encoding -; To use an output encoding conversion, iconv's output handler must be set -; otherwise output encoding conversion cannot be performed. -;iconv.output_encoding = diff --git a/etc/php84/conf.d/99_imap.ini b/etc/php84/conf.d/99_imap.ini deleted file mode 100644 index 060b23c..0000000 --- a/etc/php84/conf.d/99_imap.ini +++ /dev/null @@ -1,6 +0,0 @@ -[imap] -; rsh/ssh logins are disabled by default. Use this INI entry if you want to -; enable them. Note that the IMAP library does not filter mailbox names before -; passing them to rsh/ssh command, thus passing untrusted data to this function -; with rsh/ssh enabled is insecure. -;imap.enable_insecure_rsh=0 diff --git a/etc/php84/conf.d/99_intl.ini b/etc/php84/conf.d/99_intl.ini deleted file mode 100644 index c36c85c..0000000 --- a/etc/php84/conf.d/99_intl.ini +++ /dev/null @@ -1,7 +0,0 @@ -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING -;intl.use_exceptions = 0 diff --git a/etc/php84/conf.d/99_ldap.ini b/etc/php84/conf.d/99_ldap.ini deleted file mode 100644 index 941d8b2..0000000 --- a/etc/php84/conf.d/99_ldap.ini +++ /dev/null @@ -1,3 +0,0 @@ -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 diff --git a/etc/php84/conf.d/99_mbstring b/etc/php84/conf.d/99_mbstring deleted file mode 100644 index a5dbc73..0000000 --- a/etc/php84/conf.d/99_mbstring +++ /dev/null @@ -1,78 +0,0 @@ -[mbstring] -; language for internal character representation. -; This affects mb_send_mail() and mbstring.detect_order. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; internal/script encoding. -; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;mbstring.internal_encoding = - -; Use of this INI entry is deprecated, use global input_encoding instead. -; http input encoding. -; mbstring.encoding_translation = On is needed to use this setting. -; If empty, default_charset or input_encoding or mbstring.input is used. -; The precedence is: default_charset < input_encoding < mbstring.http_input -; http://php.net/mbstring.http-input -;mbstring.http_input = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; http output encoding. -; mb_output_handler must be registered as output buffer to function. -; If empty, default_charset or output_encoding or mbstring.http_output is used. -; The precedence is: default_charset < output_encoding < mbstring.http_output -; To use an output encoding conversion, mbstring's output handler must be set -; otherwise output encoding conversion cannot be performed. -; http://php.net/mbstring.http-output -;mbstring.http_output = - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; "auto" detect order is changed according to mbstring.language -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -mbstring.func_overload = 0 - -; enable strict encoding detection. -; Default: Off -;mbstring.strict_detection = On - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -; This directive specifies maximum stack depth for mbstring regular expressions. It is similar -; to the pcre.recursion_limit for PCRE. -; Default: 100000 -;mbstring.regex_stack_limit=100000 - -; This directive specifies maximum retry count for mbstring regular expressions. It is similar -; to the pcre.backtrack_limit for PCRE. -; Default: 1000000 -;mbstring.regex_retry_limit=1000000 diff --git a/etc/php84/conf.d/99_mysqli.ini b/etc/php84/conf.d/99_mysqli.ini deleted file mode 100644 index a6c2571..0000000 --- a/etc/php84/conf.d/99_mysqli.ini +++ /dev/null @@ -1,48 +0,0 @@ -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysqli_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysqli_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off diff --git a/etc/php84/conf.d/99_mysqlnd.ini b/etc/php84/conf.d/99_mysqlnd.ini deleted file mode 100644 index 8d8978d..0000000 --- a/etc/php84/conf.d/99_mysqlnd.ini +++ /dev/null @@ -1,33 +0,0 @@ -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -mysqlnd.collect_memory_statistics = Off - -; Records communication from all extensions using mysqlnd to the specified log -; file. -; http://php.net/mysqlnd.debug -;mysqlnd.debug = - -; Defines which queries will be logged. -;mysqlnd.log_mask = 0 - -; Default size of the mysqlnd memory pool, which is used by result sets. -;mysqlnd.mempool_default_size = 16000 - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -;mysqlnd.net_read_buffer_size = 32768 - -; Timeout for network requests in seconds. -;mysqlnd.net_read_timeout = 31536000 - -; SHA-256 Authentication Plugin related. File with the MySQL server public RSA -; key. -;mysqlnd.sha256_server_public_key = diff --git a/etc/php84/conf.d/99_odbc.ini b/etc/php84/conf.d/99_odbc.ini deleted file mode 100644 index 13d3635..0000000 --- a/etc/php84/conf.d/99_odbc.ini +++ /dev/null @@ -1,40 +0,0 @@ -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 diff --git a/etc/php84/conf.d/99_opcache.ini b/etc/php84/conf.d/99_opcache.ini deleted file mode 100644 index 3beda00..0000000 --- a/etc/php84/conf.d/99_opcache.ini +++ /dev/null @@ -1,148 +0,0 @@ -[opcache] -; Determines if Zend OPCache is enabled -opcache.enable=1 - -; Determines if Zend OPCache is enabled for the CLI version of PHP -opcache.enable_cli=0 - -; The OPcache shared memory storage size. -opcache.memory_consumption=64 - -; The amount of memory for interned strings in Mbytes. -;opcache.interned_strings_buffer=8 - -; The maximum number of keys (scripts) in the OPcache hash table. -; Only numbers between 200 and 1000000 are allowed. -opcache.max_accelerated_files=1000 - -; The maximum percentage of "wasted" memory until a restart is scheduled. -;opcache.max_wasted_percentage=5 - -; When this directive is enabled, the OPcache appends the current working -; directory to the script key, thus eliminating possible collisions between -; files with the same name (basename). Disabling the directive improves -; performance, but may break existing applications. -opcache.use_cwd=1 - -; When disabled, you must reset the OPcache manually or restart the -; webserver for changes to the filesystem to take effect. -;opcache.validate_timestamps=1 - -; How often (in seconds) to check file timestamps for changes to the shared -; memory storage allocation. ("1" means validate once per second, but only -; once per request. "0" means always validate) -;opcache.revalidate_freq=2 - -; Enables or disables file search in include_path optimization -;opcache.revalidate_path=0 - -; If disabled, all PHPDoc comments are dropped from the code to reduce the -; size of the optimized code. -opcache.save_comments=0 - -; Allow file existence override (file_exists, etc.) performance feature. -;opcache.enable_file_override=0 - -; A bitmask, where each bit enables or disables the appropriate OPcache -; passes -;opcache.optimization_level=0x7FFFBFFF - -;opcache.dups_fix=0 - -; The location of the OPcache blacklist file (wildcards allowed). -; Each OPcache blacklist file is a text file that holds the names of files -; that should not be accelerated. The file format is to add each filename -; to a new line. The filename may be a full path or just a file prefix -; (i.e., /var/www/x blacklists all the files and directories in /var/www -; that start with 'x'). Line starting with a ; are ignored (comments). -;opcache.blacklist_filename= - -; Allows exclusion of large files from being cached. By default all files -; are cached. -;opcache.max_file_size=0 - -; Check the cache checksum each N requests. -; The default value of "0" means that the checks are disabled. -;opcache.consistency_checks=0 - -; How long to wait (in seconds) for a scheduled restart to begin if the cache -; is not being accessed. -;opcache.force_restart_timeout=180 - -; OPcache error_log file name. Empty string assumes "stderr". -;opcache.error_log= - -; All OPcache errors go to the Web server log. -; By default, only fatal errors (level 0) or errors (level 1) are logged. -; You can also enable warnings (level 2), info messages (level 3) or -; debug messages (level 4). -;opcache.log_verbosity_level=1 - -; Preferred Shared Memory back-end. Leave empty and let the system decide. -;opcache.preferred_memory_model= - -; Protect the shared memory from unexpected writing during script execution. -; Useful for internal debugging only. -;opcache.protect_memory=0 - -; Allows calling OPcache API functions only from PHP scripts which path is -; started from specified string. The default "" means no restriction -;opcache.restrict_api= - -; Mapping base of shared memory segments (for Windows only). All the PHP -; processes have to map shared memory into the same address space. This -; directive allows to manually fix the "Unable to reattach to base address" -; errors. -;opcache.mmap_base= - -; Facilitates multiple OPcache instances per user (for Windows only). All PHP -; processes with the same cache ID and user share an OPcache instance. -;opcache.cache_id= - -; Enables and sets the second level cache directory. -; It should improve performance when SHM memory is full, at server restart or -; SHM reset. The default "" disables file based caching. -;opcache.file_cache= - -; Enables or disables opcode caching in shared memory. -;opcache.file_cache_only=0 - -; Enables or disables checksum validation when script loaded from file cache. -;opcache.file_cache_consistency_checks=1 - -; Implies opcache.file_cache_only=1 for a certain process that failed to -; reattach to the shared memory (for Windows only). Explicitly enabled file -; cache is required. -;opcache.file_cache_fallback=1 - -; Enables or disables copying of PHP code (text segment) into HUGE PAGES. -; This should improve performance, but requires appropriate OS configuration. -;opcache.huge_code_pages=1 - -; Validate cached file permissions. -;opcache.validate_permission=0 - -; Prevent name collisions in chroot'ed environment. -;opcache.validate_root=0 - -; If specified, it produces opcode dumps for debugging different stages of -; optimizations. -;opcache.opt_debug_level=0 - -; Specifies a PHP script that is going to be compiled and executed at server -; start-up. -; http://php.net/opcache.preload -;opcache.preload= - -; Preloading code as root is not allowed for security reasons. This directive -; facilitates to let the preloading to be run as another user. -; http://php.net/opcache.preload_user -;opcache.preload_user= - -; Prevents caching files that are less than this number of seconds old. It -; protects from caching of incompletely updated files. In case all file updates -; on your site are atomic, you may increase performance by setting it to "0". -;opcache.file_update_protection=2 - -; Absolute path used to store shared lockfiles (for *nix only). -;opcache.lockfile_path=/tmp diff --git a/etc/php84/conf.d/99_openssl.ini b/etc/php84/conf.d/99_openssl.ini deleted file mode 100644 index ba95cd7..0000000 --- a/etc/php84/conf.d/99_openssl.ini +++ /dev/null @@ -1,17 +0,0 @@ -[openssl] -; The location of a Certificate Authority (CA) file on the local filesystem -; to use when verifying the identity of SSL/TLS peers. Most users should -; not specify a value for this directive as PHP will attempt to use the -; OS-managed cert stores in its absence. If specified, this value may still -; be overridden on a per-stream basis via the "cafile" SSL stream context -; option. -;openssl.cafile= - -; If openssl.cafile is not specified or if the CA file is not found, the -; directory pointed to by openssl.capath is searched for a suitable -; certificate. This value must be a correctly hashed certificate directory. -; Most users should not specify a value for this directive as PHP will -; attempt to use the OS-managed cert stores in its absence. If specified, -; this value may still be overridden on a per-stream basis via the "capath" -; SSL stream context option. -;openssl.capath= diff --git a/etc/php84/conf.d/99_pdo.ini b/etc/php84/conf.d/99_pdo.ini deleted file mode 100644 index 1e03675..0000000 --- a/etc/php84/conf.d/99_pdo.ini +++ /dev/null @@ -1,6 +0,0 @@ -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name diff --git a/etc/php84/conf.d/99_pdo_mysql.ini b/etc/php84/conf.d/99_pdo_mysql.ini deleted file mode 100644 index 1598241..0000000 --- a/etc/php84/conf.d/99_pdo_mysql.ini +++ /dev/null @@ -1,4 +0,0 @@ -[Pdo_mysql] -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -;pdo_mysql.default_socket= diff --git a/etc/php84/conf.d/99_pgsql.ini b/etc/php84/conf.d/99_pgsql.ini deleted file mode 100644 index 0b17fb5..0000000 --- a/etc/php84/conf.d/99_pgsql.ini +++ /dev/null @@ -1,27 +0,0 @@ -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 diff --git a/etc/php84/conf.d/99_phar.ini b/etc/php84/conf.d/99_phar.ini deleted file mode 100644 index e3fc161..0000000 --- a/etc/php84/conf.d/99_phar.ini +++ /dev/null @@ -1,8 +0,0 @@ -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = diff --git a/etc/php84/conf.d/99_session.ini b/etc/php84/conf.d/99_session.ini deleted file mode 100644 index df75c1c..0000000 --- a/etc/php84/conf.d/99_session.ini +++ /dev/null @@ -1,245 +0,0 @@ -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if -; your OS has problems with many files in one directory, and is -; a more efficient layout for servers that handle many sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "/var/lib/php/sessions" - -; Whether to use strict session mode. -; Strict session mode does not accept an uninitialized session ID, and -; regenerates the session ID if the browser sends an uninitialized session ID. -; Strict mode protects applications from session fixation via a session adoption -; vulnerability. It is disabled by default for maximum compatibility, but -; enabling it is encouraged. -; https://wiki.php.net/rfc/strict_sessions -session.use_strict_mode = 1 - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the be-all and end-all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it -; inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF) -; Current valid values are "Strict", "Lax" or "None". When using "None", -; make sure to include the quotes, as `none` is interpreted like `false` in ini files. -; https://tools.ietf.org/html/draft-west-first-party-cookies-07 -session.cookie_samesite = "Lax" - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 1 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts on each request. -; For high volume production servers, using a value of 1000 is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 86400 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script is the equivalent of setting -; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 -type f | xargs rm - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users' security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Set session ID character length. This value could be between 22 to 256. -; Shorter length than default is supported only for compatibility reason. -; Users should use 32 or more chars. -; http://php.net/session.sid-length -; Default Value: 32 -; Development Value: 26 -; Production Value: 26 -session.sid_length = 32 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -;
is special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. tag's action attribute URL will not be modified -; unless it is specified. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=" -; Development Value: "a=href,area=href,frame=src,form=" -; Production Value: "a=href,area=href,frame=src,form=" -; http://php.net/url-rewriter.tags -session.trans_sid_tags = "a=href,area=href,frame=src,form=" - -; URL rewriter does not rewrite absolute URLs by default. -; To enable rewrites for absolute paths, target hosts must be specified -; at RUNTIME. i.e. use ini_set() -; tags is special. PHP will check action attribute's URL regardless -; of session.trans_sid_tags setting. -; If no host is defined, HTTP_HOST will be used for allowed host. -; Example value: php.net,www.php.net,wiki.php.net -; Use "," for multiple hosts. No spaces are allowed. -; Default Value: "" -; Development Value: "" -; Production Value: "" -;session.trans_sid_hosts="" - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.sid_bits_per_character = 5 - -; Enable upload progress tracking in $_SESSION -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.enabled -;session.upload_progress.enabled = On - -; Cleanup the progress information as soon as all POST data has been read -; (i.e. upload completed). -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.cleanup -;session.upload_progress.cleanup = On - -; A prefix used for the upload progress key in $_SESSION -; Default Value: "upload_progress_" -; Development Value: "upload_progress_" -; Production Value: "upload_progress_" -; http://php.net/session.upload-progress.prefix -;session.upload_progress.prefix = "upload_progress_" - -; The index name (concatenated with the prefix) in $_SESSION -; containing the upload progress information -; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" -; http://php.net/session.upload-progress.name -;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" - -; How frequently the upload progress should be updated. -; Given either in percentages (per-file), or in bytes -; Default Value: "1%" -; Development Value: "1%" -; Production Value: "1%" -; http://php.net/session.upload-progress.freq -;session.upload_progress.freq = "1%" - -; The minimum delay between updates, in seconds -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.upload-progress.min-freq -;session.upload_progress.min_freq = "1" - -; Only write session data when session data is changed. Enabled by default. -; http://php.net/session.lazy-write -;session.lazy_write = On diff --git a/etc/php84/conf.d/99_soap.ini b/etc/php84/conf.d/99_soap.ini deleted file mode 100644 index c048b3f..0000000 --- a/etc/php84/conf.d/99_soap.ini +++ /dev/null @@ -1,16 +0,0 @@ -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 diff --git a/etc/php84/conf.d/99_sqlite3.ini b/etc/php84/conf.d/99_sqlite3.ini deleted file mode 100644 index 1965589..0000000 --- a/etc/php84/conf.d/99_sqlite3.ini +++ /dev/null @@ -1,13 +0,0 @@ -[sqlite3] -; Directory pointing to SQLite3 extensions -; http://php.net/sqlite3.extension-dir -;sqlite3.extension_dir = - -; SQLite defensive mode flag (only available from SQLite 3.26+) -; When the defensive flag is enabled, language features that allow ordinary -; SQL to deliberately corrupt the database file are disabled. This forbids -; writing directly to the schema, shadow tables (eg. FTS data tables), or -; the sqlite_dbpage virtual table. -; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html -; (for older SQLite versions, this flag has no use) -;sqlite3.defensive = 1 diff --git a/etc/php84/conf.d/99_sysvshm.ini b/etc/php84/conf.d/99_sysvshm.ini deleted file mode 100644 index 03da3ab..0000000 --- a/etc/php84/conf.d/99_sysvshm.ini +++ /dev/null @@ -1,3 +0,0 @@ -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 diff --git a/etc/php84/conf.d/99_tidy.ini b/etc/php84/conf.d/99_tidy.ini deleted file mode 100644 index 90c5f13..0000000 --- a/etc/php84/conf.d/99_tidy.ini +++ /dev/null @@ -1,10 +0,0 @@ -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off diff --git a/etc/php84/php-fpm.conf b/etc/php84/php-fpm.conf deleted file mode 100644 index 45c625b..0000000 --- a/etc/php84/php-fpm.conf +++ /dev/null @@ -1,143 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;; -; FPM Configuration ; -;;;;;;;;;;;;;;;;;;;;; - -; All relative paths in this configuration file are relative to PHP's install -; prefix (/usr). This prefix can be dynamically changed by using the -; '-p' argument from the command line. - -;;;;;;;;;;;;;;;;;; -; Global Options ; -;;;;;;;;;;;;;;;;;; - -[global] -; Pid file -; Note: the default prefix is /var -; Default Value: none -pid = run/php-fpm.pid - -; Error log file -; If it's set to "syslog", log is sent to syslogd instead of being written -; into a local file. -; Note: the default prefix is /var -; Default Value: log/php-fpm.log -error_log = syslog - -; syslog_facility is used to specify what type of program is logging the -; message. This lets syslogd specify that messages from different facilities -; will be handled differently. -; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON) -; Default Value: daemon -syslog.facility = local2 - -; syslog_ident is prepended to every message. If you have multiple FPM -; instances running on the same server, you can change the default value -; which must suit common needs. -; Default Value: php-fpm -syslog.ident = php-fpm - -; Log level -; Possible Values: alert, error, warning, notice, debug -; Default Value: notice -log_level = notice - -; Log limit on number of characters in the single line (log entry). If the -; line is over the limit, it is wrapped on multiple lines. The limit is for -; all logged characters including message prefix and suffix if present. However -; the new line character does not count into it as it is present only when -; logging to a file descriptor. It means the new line character is not present -; when logging to syslog. -; Default Value: 1024 -;log_limit = 4096 - -; Log buffering specifies if the log line is buffered which means that the -; line is written in a single write operation. If the value is false, then the -; data is written directly into the file descriptor. It is an experimental -; option that can potentionaly improve logging performance and memory usage -; for some heavy logging scenarios. This option is ignored if logging to syslog -; as it has to be always buffered. -; Default value: yes -;log_buffering = no - -; If this number of child processes exit with SIGSEGV or SIGBUS within the time -; interval set by emergency_restart_interval then FPM will restart. A value -; of '0' means 'Off'. -; Default Value: 0 -emergency_restart_threshold = 5 - -; Interval of time used by emergency_restart_interval to determine when -; a graceful restart will be initiated. This can be useful to work around -; accidental corruptions in an accelerator's shared memory. -; Available Units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -emergency_restart_interval = 10 - -; Time limit for child processes to wait for a reaction on signals from master. -; Available units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -;process_control_timeout = 0 - -; The maximum number of processes FPM will fork. This has been designed to control -; the global number of processes when using dynamic PM within a lot of pools. -; Use it with caution. -; Note: A value of 0 indicates no limit -; Default Value: 0 -process.max = 16 - -; Specify the nice(2) priority to apply to the master process (only if set) -; The value can vary from -19 (highest priority) to 20 (lowest priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool process will inherit the master process priority -; unless specified otherwise -; Default Value: no set -process.priority = 0 - -; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. -; Default Value: yes -;daemonize = yes - -; Set open file descriptor rlimit for the master process. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit for the master process. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Specify the event mechanism FPM will use. The following is available: -; - select (any POSIX os) -; - poll (any POSIX os) -; - epoll (linux >= 2.5.44) -; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0) -; - /dev/poll (Solaris >= 7) -; - port (Solaris >= 10) -; Default Value: not set (auto detection) -;events.mechanism = epoll - -; When FPM is built with systemd integration, specify the interval, -; in seconds, between health report notification to systemd. -; Set to 0 to disable. -; Available Units: s(econds), m(inutes), h(ours) -; Default Unit: seconds -; Default value: 10 -;systemd_interval = 10 - -;;;;;;;;;;;;;;;;;;;; -; Pool Definitions ; -;;;;;;;;;;;;;;;;;;;; - -; Multiple pools of child processes may be started with different listening -; ports and different management options. The name of the pool will be -; used in logs and stats. There is no limitation on the number of pools which -; FPM can handle. Your system will tell you anyway :) - -; Include one or more files. If glob(3) exists, it is used to include a bunch of -; files from a glob(3) pattern. This directive can be used everywhere in the -; file. -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p argument) -; - /usr otherwise -include=/etc/php84/php-fpm.d/*.conf diff --git a/etc/php84/php-fpm.d/www.conf b/etc/php84/php-fpm.d/www.conf deleted file mode 100644 index 913dd17..0000000 --- a/etc/php84/php-fpm.d/www.conf +++ /dev/null @@ -1,424 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[www] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = nobody -group = nobody - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -;listen = 127.0.0.1:9000 -listen = /run/php-fpm84/php-fpm.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = nobody -listen.group = apache -listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -; listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -process.priority = 0 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 8 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 2 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 4 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -pm.max_requests = 5000 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; Depth of slow log stack trace. -; Default Value: 20 -;request_slowlog_trace_depth = 20 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 60 - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -;chdir = /var/www - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -security.limit_extensions = .php .phar .phtml - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M diff --git a/etc/php84/php.ini b/etc/php84/php.ini deleted file mode 100644 index 567efca..0000000 --- a/etc/php84/php.ini +++ /dev/null @@ -1,854 +0,0 @@ -[PHP] -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -; To disable this feature set this option to an empty value -;user_ini.filename = ".user.ini" - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It is -; generally recommended that should be used and that this feature -; should be disabled, as enabling it may result in issues when generating XML -; documents, however this remains supported for backward compatibility reasons. -; Note that this directive does not control the would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; Note: if open_basedir is set, the cache is disabled -; http://php.net/realpath-cache-size -;realpath_cache_size = 4096k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -; If enabled, scripts may be written in encodings that are incompatible with -; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such -; encodings. To use this feature, mbstring extension must be enabled. -; Default: Off -;zend.multibyte = Off - -; Allows to set the default encoding for the scripts. This value will be used -; unless "declare(encoding=...)" directive appears at the top of the script. -; Only affects if zend.multibyte is set. -; Default: "" -;zend.script_encoding = - -; Allows to include or exclude arguments from stack traces generated for exceptions. -; In production, it is recommended to turn this setting on to prohibit the output -; of sensitive information in stack traces -; Default: Off -zend.exception_ignore_args = On - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = On - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 45 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 30 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -;max_input_vars = 1000 - -; Maximum amount of memory a script may consume -; http://php.net/memory-limit -memory_limit = 1024M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it is automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL (Show all errors, warnings and notices including coding standards.) -; E_ALL & ~E_NOTICE (Show all errors, except for notices) -; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT -; http://php.net/error-reporting -error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED & ~E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; For production environments, we recommend logging errors rather than -; sending them to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = Off - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. We strongly recommend you -; set this to 'off' for production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = Off - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This is only effective in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; This directive is DEPRECATED. -; Default Value: Off -; Development Value: Off -; Production Value: Off -; http://php.net/track-errors -;track_errors = Off - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of formatting the -; error message as HTML for easier reading. This directive controls whether -; the error message is formatted as HTML or not. -; Note: This directive is hardcoded to Off for the CLI SAPI -; http://php.net/html-errors -;html_errors = On - -; If html_errors is set to On *and* docref_root is not empty, then PHP -; produces clickable error messages that direct to a page describing the error -; or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty, in which -; case no links to documentation are generated. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on Windows). -error_log = syslog - -; The syslog ident is a string which is prepended to every message logged -; to syslog. Only used when error_log is set to syslog. -syslog.ident = php - -; The syslog facility is used to specify what type of program is logging -; the message. Only used when error_log is set to syslog. -syslog.facility = local2 - -; Set this to disable filtering control characters (the default). -; Some loggers only accept NVT-ASCII, others accept anything that's not -; control characters. If your logger accepts everything, then no filtering -; is needed at all. -; Allowed values are: -; ascii (all printable ASCII characters and NL) -; no-ctrl (all characters except control characters) -; all (all characters) -; raw (like "all", but messages are not split at newlines) -; http://php.net/syslog.filter -syslog.filter = ascii - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. G,P,C,E & S are abbreviations for the following respective super -; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty -; paid for the registration of these arrays and because ENV is not as commonly -; used as the others, ENV is not recommended on productions servers. You -; can still get access to the environment variables through getenv() should you -; need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P & C) should be -; registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive -; are specified in the same manner as the variables_order directive, -; EXCEPT one. Leaving this value empty will cause PHP to use the value set -; in the variables_order directive. It does not mean it will leave the super -; globals array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the ENV, REQUEST and SERVER variables are created when they're -; first used (Just In Time) instead of when the script starts. If these -; variables are not used within a script, having this directive on will result -; in a performance gain. The PHP directive register_argc_argv must be disabled -; for this directive to have any effect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Whether PHP will read the POST data. -; This option is enabled by default. -; Most likely, you won't want to disable this option globally. It causes $_POST -; and $_FILES to always be empty; the only way you will be able to read the -; POST data will be through the php://input stream wrapper. This can be useful -; to proxy requests or to process the POST data in a memory efficient fashion. -; http://php.net/enable-post-data-reading -;enable_post_data_reading = Off - -; Maximum size of POST data that PHP will accept. -; Its value may be 0 to disable the limit. It is ignored if POST data reading -; is disabled through enable_post_data_reading. -; http://php.net/post-max-size -post_max_size = 8M - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a media type using the Content-Type header. To -; disable this, simply set it to be empty. -; PHP's built-in default media type is set to text/html. -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to UTF-8. -; http://php.net/default-charset -default_charset = "UTF-8" - -; PHP internal character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/internal-encoding -;internal_encoding = - -; PHP input character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/input-encoding -;input_encoding = - -; PHP output character encoding is set to empty. -; If empty, default_charset is used. -; See also output_buffer. -; http://php.net/output-encoding -;output_encoding = - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path -;include_path = ".:/php/includes" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -;doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -;user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -;extension_dir = "./" - -; Directory where the temporary files should be placed. -; Defaults to the system default (see sys_get_temp_dir) -;sys_temp_dir = "/tmp" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside -; of the web tree and people will not be able to circumvent .htaccess security. -;cgi.discard_path=1 - -; FastCGI under IIS supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If set to 0, PHP sends Status: header that -; is supported by Apache. When this option is set to 1, PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! -; (shebang) at the top of the running script. This line might be needed if the -; script support running both as stand-alone script and via PHP CGI<. PHP in CGI -; mode skips this line and ignores its content if this directive is turned on. -; http://php.net/cgi.check-shebang-line -;cgi.check_shebang_line=1 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -upload_tmp_dir = /var/lib/php/uploads - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 20M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -[Assertion] -; Switch whether to compile assertions at all (to have no overhead at run-time) -; -1: Do not compile at all -; 0: Jump over assertion at run-time -; 1: Execute assertions -; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) -; Default Value: 1 -; Development Value: 1 -; Production Value: -1 -; http://php.net/zend.assertions -zend.assertions = -1 - -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Throw an AssertionError on failed assertions -; http://php.net/assert.exception -;assert.exception = On - -; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[CLI Server] -; Whether the CLI web server uses ANSI color coding in its terminal output. -cli_server.color = On - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -date.timezone = UTC - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Built-In Module Settings ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a component's typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[ffi] -; FFI API restriction. Possible values: -; "preload" - enabled in CLI scripts and preloaded files (default) -; "false" - always disabled -; "true" - always enabled -;ffi.enable=preload - -; List of headers files to preload, wildcard patterns allowed. -;ffi.preload= - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[mail function] -; You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = "/usr/sbin/sendmail -f 'noreply@slackware.uk' -t" - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(). -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = Off - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = -; Log mail to syslog (Event Log on Windows). -;mail.log = syslog - -[Pcre] -; PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -; PCRE library recursion limit. -; Please note that if you set this value to a high number you may consume all -; the available process stack and eventually crash PHP (due to reaching the -; stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -; Enables or disables JIT compilation of patterns. This requires the PCRE -; library to be compiled with JIT support. -;pcre.jit=1